STV Motorsports

The  Belt Changing Tool  from STV Motorsports is a no-nonsense tool that does exactly what it’s supposed to, and that is to make changing belts on the trail a 5-minute job instead of a hour-long ordeal! Most belt tools including the OEM one are made of harder materials than what the rollers (that the tool interacts with) are made of.

STV Motorsports Sewn-in Type 4 Point Latch and Link 2 or 3 inch Racing Harnesses Safety Seat Belt STV Motorsports Racing Harnesses are a must-have for any driver of high performance or racing vehicles. They will offer you the best protection and driver safety as well as comfort. The 4 Point Racing Harness is made from ultra-high quality materials that will firmly hold you in place while racing. 2 & 3 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level. Heavy duty construction made for Off-road use. Quick Release latch mechanism so buckle opens without a struggle. Adjustable lap and sternum strap to accommodate all sizes of riders. EZ adjusters. APPLICATIONS: UTV, Side by Side, Polaris, Can-Am, Trucks, Jeep, Car, Sand Rail, Off-Road racing etc TYPE: Shoulder straps are sewn to lap belts in order to achieve the best protection coupled with convenience (instead of locking all 4 points together, you will only need to clasp lap belts)

STV Stands for Sport Terrain Vehicle. We are committed to offer the best products,exceptional service and best shopping experience for the  off-road enthusiast .

HIGH PERFORMANCE:  STV Motorsports Racing Harnesses  are a must-have for any driver of high performance or racing vehicles. They will offer you the best protection and driver safety as well as comfort. SAFETY AND COMFORT: The 4 Point Racing Harness is made from ultra-high quality materials that will firmly hold you in place while racing. 2 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level. UNIVERSAL RACING DESIGN: Heavy duty construction made for Off-road use. Quick Release latch mechanism so buckle opens without a struggle. EASY INSTALLATION: Adjustable lap and sternum strap to accommodate all sizes of riders. V-type racing design. APPLICATIONS: UTV, Side by Side, Polaris, Can-Am, Trucks, Jeep, Car, Sand Rail, Off-Road racing etc Shop Now

20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life.

STV Motorsports Harnesses are a must-have for any driver of high performance, off-road or racing vehicles. They will offer you the best protection and driver safety as well as comfort. Our line of top-brand,heavy-duty safety harnesses includes popular five-point and four-point designs. Additionally, we offer a variety of latch designs and SFI approved harnesses.

20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life.

STV Motorsports 4 Point, 2 inch Harnesses Safety Seat Belt STV Motorsports Harnesses are a must-have for any driver of high performance or racing vehicles. They will offer you the best protection and driver safety as well as comfort. The 4 Point Harness is made from ultra-high quality materials that will firmly hold you in place. 2 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level. Heavy duty construction made for Off-road use. Utilizes automotive buckle mechanism so buckle opens without a struggle, ONE-HANDED even. Adjustable lap and sternum strap to accommodate all sizes of riders. EZ adjusters. APPLICATIONS: UTV, Side by Side, Polaris, Can-Am, Trucks, Jeep, Car, Sand Rail, Off-Road racing etc TYPE: Shoulder straps are sewn to lap belts in order to achieve the best protection coupled with convenience (instead of locking all 4 points together, you will only need to clasp lap belts) ONLY SEAT BELT HARNESS IS INCLUDED ( ...

20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life. See More:-  https://stvmotorsports.com/shop/shop-by-category/rocker-switches/air-compressor-laser-rocker-switch/ Love   Save  Write a comment... Comment

THIS CLAMPS ARE USED FOR ALL KIND OF FABRICATION: – TIRE MOUNTS – ROLL CAGE BRACES – SEAT BELT HARNESS BARS – REMOVABLE COOLER RACK – WHIP MOUNTING TABS – GPS & CAMERA MOUNTS – CUSTOM LIGHT BARS CLAMP I.D. = 1.5″ (IT WILL FIT 1.5″ TUBING) CLAMP O.D. = 2.25″ (EXTERIOR DIAMETER OF THE CLAMP) CLAMP HEIGHT = 1.75″ (CLAMP LENGTH) CLAMP THICKNESS = 3/8″ (CLAMP WALL) CLAMP SS ALLEN BOLTS = 4 HEAVY DUTY STEEL CNC MACHINED COMES AS SHOWN IN RAW STEEL MADE IN THE USA See More:-  https://stvmotorsports.com/shop/shop-by-vehicles/yamaha/yxz-1000r/stv-motorsports-1-5-steel-tube-clamp/ Love   Save  Write a comment... Comment

NOTES: – Does NOT fit Desert Editions or Trails and Rocks Editions – Axles are sold individually. Applicability: 2014-18 Polaris RZR XP 1000 / RZR XP 4 1000 / RZR XP Turbo / RZR XP 4 Turbo / High Lifter Edition The Polaris RZR XP1K is a machine designed to take you on the ride of your life. If you want to go down those crazy trails and power through all those obstacles, then you probably need to upgrade your factory axles, which are an often overlooked yet vital part. The Demon Heavy Duty Stock Length Axles are a great upgrade to make on your machine that will make this tough machine even tougher. An approximate 20% increase in axle diameter and approximate 15% increase in CV joint size means that this axle is beefer, which means an increase in strength and durability. The chromoly steel axles feature internal CV joint components that are precision machined and have induction heat treated bearings. What does that mean for you? You’ll experience a decrease in friction and an inc...

LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life. See More:-  https://stvmotorsports.com/shop/shop-by-category/rocker-switches/air-compressor-laser-rocker-switch/

20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the stan All Products dard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life. See More:-  https://stvmotorsports.com/shop/shop-by-category/rocker-switches/2x4-4x4-laser-rocker-switch/

The  Belt Changing Tool  from STV Motorsports is a no-nonsense tool that does exactly what it’s supposed to, and that is to make changing belts on the trail a 5-minute job instead of a hour-long ordeal! Most belt tools including the  OEM  one are made of harder materials than what the rollers (that the tool interacts with) are made of. Consequently using those belt tools will  mark up rollers , which will eventually create a flattened edge and eventually  lead to clutch failure  (belts being eaten up VERY quickly). Additionally the STV Motorsports Belt Changing Tool is made of  6061 Billet Aluminum  and is PROVEN to maintain the integrity of clutch components AND make changing belts  QUICK ! This belt changing tool has an ergonomic handle for a  comfortable grip  making it easy for anyone to change a belt The tool’s short length makes it easy to rotate it 360 degrees while engaged in the secondary clutch. CNC machined...

DOM STEEL TUBING – 1.5″ WITH 4 SS ALLEN BOLTS THIS CLAMPS ARE USED FOR ALL KIND OF FABRICATION:   – TIRE MOUNTS – ROLL CAGE BRACES – SEAT BELT HARNESS BARS – REMOVABLE COOLER RACK – WHIP MOUNTING TABS – GPS & CAMERA MOUNTS – CUSTOM LIGHT BARS CLAMP I.D. = 1.5″ (IT WILL FIT 1.5″ TUBING) CLAMP O.D. = 2.25″ (EXTERIOR DIAMETER OF THE CLAMP) CLAMP HEIGHT = 1.75″ (CLAMP LENGTH) CLAMP THICKNESS = 3/8″ (CLAMP WALL) CLAMP SS ALLEN BOLTS = 4 HEAVY DUTY STEEL CNC MACHINED COMES AS SHOWN IN RAW STEEL MADE IN THE USA See More:-  https://stvmotorsports.com/shop/shop-by-vehicles/yamaha/yxz-1000r/stv-motorsports-1-5-steel-tube-clamp/

20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life. See More:-  https://stvmotorsports.com/shop/rocker-switches/led-light-bar-laser-rocker-switch/