STV Motorsports

20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. Check here: https://stvmotorsports.com/shop/shop-by-category/rocker-switches/fresh-water-pump-laser-rocker-switch

Wide applications: It can be used in Trucks, Cars, UTV’s, ATV’s, SUV’s, Boats, Tractors, Trailers etc. FEATURES : LED Power: 72W Operating Voltage: 10-30V DC Waterproof rate: IP 67 2 4PCS*3W high intensity LEDs CREE Current draw 6A @ 12V, 3A @ 24V Base Color: Black Color Temperature: 6000K Material: Diecast aluminum housing Lens material: Toughed glass Mounting Bracket: Alu firm bracket 30000 hours above life time Dimensions: 14 inch Check here: https://stvmotorsports.com/shop/shop-by-category/led-lights/12-inch-led-light-bar

DOM STEEL TUBING – 1.75″ WITH 4 SS ALLEN BOLTS THIS CLAMPS ARE USED FOR ALL KIND OF FABRICATION:   – TIRE MOUNTS – ROLL CAGE BRACES – SEAT BELT HARNESS BARS – REMOVABLE COOLER RACK – WHIP MOUNTING TABS – GPS & CAMERA MOUNTS – CUSTOM LIGHT BARS CLAMP I.D. = 1.75″ (IT WILL FIT 1.75″ TUBING) CLAMP O.D. = 2.5″ (EXTERIOR DIAMETER OF THE CLAMP) Check here: https://stvmotorsports.com/shop/shop-by-vehicles/yamaha/yxz-1000r/1-75-steel-tube-clamp

With its massive 60-watts of power, the RM-60 is the perfect choice if you’re chasing for a race team, need strong in-car communications, or simply want reliable base camp communications, the RM-60 Base/Chase kit is the best choice. This kit combines the 60-watt RM-60 VHF radio with NMO Mount antenna and coax cable for easy installation into your vehicle or at base camp.

The STVMOTORSPORTS CAN AM X3 billet aluminum radius rod plate was designed to add strength to the frame/radius rods. The OEM plate is flimsy, will cause stress to the frame and premature wear/compete failure to the radius rods. 1.50” thick 6061 billet aluminum designed and machined in house at our facility here in the USA. This plate will fit all years and models of the CAN AM Maverick X3 . Bolt on installation makes replacement in minutes with no modifications required and it works with aftermarket rods as well.

Get back in the Race with the New STV® Can-am Maverick X3 Belt Changing Tool. This Aluminum Belt Changing item is Rust-proof and durable. This Belt Changing Tool was designed for the Can-Am Maverick X3, to make changing the belt super easy with no modifications. This will work with stock OEM clutches and most aftermarket clutches and helices. INSTALLATION: This 2-piece design threads into the center of the secondary clutch till fully seated, you will then push on the handle downwards to release the belt tension and remove or install your belt in quick time. No more destroying your clutches or breaking tools, this design makes it quick and easy to change your belt anywhere with no extra tools. Our In-house engineers and machinists have come together to bring you a product that will not only decrease belt changing time, but also get you two steps closer to the finish line. Designed, Machined and Produced here at STV Motorsports®, Las Vegas, NV, USA.

Our SFI-CERTIFIED harnesses are under high demand from duners, to JEEPs, UTV’s and RACERS alike! Please check through our available items and if you see something that is not available you can reach us for more information. Visit here: https://stvmotorsports.com/product-category/shop-by-category/harnesses/

·         STV Motorsports Racing Harnesses are a must-have for any driver of high performance or racing vehicles. They will offer you the best protection and driver safety as well as comfort. ·         The 4 Point Racing Harness is made from ultra-high quality materials that will firmly hold you in place while racing. 3 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level. ·         SFI Certified and heavy duty construction made for Off-road use. Quick Release latch mechanism so buckle opens without a struggle. ·         SFI Certified ·         Adjustable lap and sternum strap to accommodate all sizes of riders. EZ adjusters. ·         APPLICATIONS: UTV, Side by Side, Polaris, Can-Am, Trucks, Jeep, Car, Sand Rail, Off-Road racing etc

20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life. Visit here:  https://stvmotorsports.com/shop/shop-by-category/rocker-switches/boar-lights-laser-rocker-switch

The STV Motorsports race-inspired steering wheel is strong and wrapped in suede leather. 6-lug design. Get yours today at 👉  https://stvmotorsports.com

We welcome our new low profile bumper to the STV Family of products. FITS: Polaris RZR XP1000, XP4 1000, RZR 900, 900S, 1000S and all RZR TURBO MODELS. MADE IN THE USA by our team of professionals and used on several vehicles in pre-production. We’re not reinventing the wheel here, just making it more affordable. Turbo: trimming of some plastic around the radiator is required.

The STV MOTORSPORTS® clutch alignment tool is a must have tool that will SAVE your weekend ride! The spacing issues between the primary and secondary shafts can result in poor clutch performance and will cause belt failure. Motor and trans will automatically fall out of alignment, this tool can save up to $1000 in belts! This tool is also a must when motor and transmission are detached. 100% MADE IN USA

Want to control all of your accessories without running wire and cutting into your dash? This all-in-one switch system is perfect and won’t cost you a fortune! This switch system solves multiple problems associated with switches, relays and copious amounts of wires that end up becoming a liability (long wire runs can short and end up burning your rig down in the process) Operating at 12-24 Volts and a max power rating of 1200 Watts, you can control 8 different accessories at the same time. Capacitive sensing technology with green indicator light display, the switch panel has high sensitivity, stability and strong anti-interference ability. Utilizing IGBT (Insulated-gate Bipolar Transistor) System instead of Relay, making the switch panel smaller and easy to install and as well as safe with solid-state components (solid-state components guarantee stability, consistency and piece of mind).

MULTI-COLOR LED: The STV Motorsports RGB Rock Lights have multi-color changing options and music activated lights BLUETOOTH CONTROLLED: Bluetooth device ready with Smartphone APP control; scan the QR Code from the box and download the free APP VERY DURABLE: Heavy-Duty aluminum housing with scratch resistant glass to protect the lights from the weather and terrain, waterproof and anti-corrosive UNIVERSAL USE: 9W/Pcs, 9-36V DC will give you additional lighting to your vehicle; they will fit many applications: Off Road Vehicles, Jeep, ATV, UTV, Truck, Boat (under vehicle or as interior lights) EASY INSTALLATION: Simple to install with everything prewired and fuse built inline; You will just need to install the lights in desired location and connect the red wire to a switch or positive source and the black to a ground source. Shop Now:  https://www.amazon.com/Motorsports-Flashing-Bluetooth-Multicolor-Waterproof/dp/B07T5XZ8SX

STV Motorsports Sewn-in Type 5 Point Latch and Link 2 or 3 inch Safety Seat Belt STV Motorsports Racing Harnesses are a must-have for any driver of high performance or racing vehicles. They will offer you the best protection and driver safety as well as comfort. The 5 Point Racing Harness is made from ultra-high quality materials that will firmly hold you in place while racing. 2 & 3 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level. Heavy duty construction made for Off-road use. Quick Release latch mechanism so buckle opens without a struggle.

Adds additional switch placement for ALL the accessories you have 100% Made in the USA Gives your vehicle a custom look as well as functionality All hardware and mounting instructions are included Fits all rocker switches (universal fit) No switches/dash are included Package includes: 1 set of dash plates For Polaris 2015-2018 XP 1000, XP4 1000 & XP 900 With round Speedometer Bezel Check here:  https://stvmotorsports.com/shop/shop-by-category/dash-panels/2014-2017-polaris-rzr-xp-1000-xp1k-black-aluminum-dash-panel-set-2-plates/