STV Motorsports

HIGH PERFORMANCE: STV Motorsports Racing Harnesses are a must-have for any driver of high performance or racing vehicles. They will offer you the best protection and driver safety as well as comfort. SAFETY AND COMFORT: The 4 Point Racing Harness is made from ultra-high quality materials that will firmly hold you in place while racing. 3 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level.

Get back in the Race with the New STV® Polaris RZR Turbo/S/RS1 Belt Changing Tool . This Aluminum Belt Changing item is rust-proof and durable. This Belt Changing Tool was designed for the Polaris RZR Turbo and RZR S 2016 – 2019 models and the Polaris RZR RS1 2018 & 2019 models, to make changing the belt super easy with no modifications. This will work with stock OEM clutches and most aftermarket clutches and helices. INSTALLATION: This 3-piece design threads into the center of the secondary clutch till fully seated, you will then push on the handle downwards to release the belt tension and remove or install your belt in quick time. No more destroying your clutches or breaking tools, this design makes it quick and easy to change your belt anywhere with no extra tools. Our In-house engineers and machinists have come together to bring you a product that will not only decrease belt changing time, but also get you two steps closer to the finish line. Designed, Machined and P...

One of the  FIRST  things you should upgrade when you receive your brand new RZR is the  ROLL CAGE , aside from a few other things. When cage manufacturers build aftermarket cages they will often use 1.75″ DOM tubing with a thickness of .095″ ( the stock cage is only .065″ ). In  THIS  case when you require THICKER tubing, we have these  1.75” .120”  wall cage bungs! So, in order to mount these new  STRONGER ,  BIGGER  and  BETTER  cages, you’ll need these cage “bungs” in order to mount aftermarket cage to stock mount locations. Click here:  https://stvmotorsports.com/shop/shop-by-category/fabrication/rzr-1000-cage-bung-set-6-1-75-120/

-KIT INCLUDES: 10 (TEN) #6 Spring, .500 Flush button &  #6 Steel Springs Fits Tabs That Are 1-3/8″ Center To Center  -SPRINGS: For 3/8″ or 7/16″ buttons – Quarter Turn Panel Fastener #6 Stainless Steel S-Springs -BUTTONS: (3/8″ – .500″) The length of the button is measured from the panel surface down to the bottom edge of the spring seat. -TABS: For Countersunk 3/8″ or 7/16″ Buttons For mounting sheet metal and fiberglass, quarter turn panel fasteners are the most practical fasteners requiring only one tool. Panel fasteners have been used in off-road racing for years due to their lightweight and durable design.

The Belt Changing Tool from STV Motorsports does exacly what it's supposed to do, and that is to make changing belts on the trail a 5-minute job instead of a hour-long ordeal. Most belt tools including the OEM one are made of harder materials than what the rollers (that the tool interacts with) are made of. Consequently using those belt tools will mark up rollers, which will eventually create a flattened edge and will lead to clutch failure (belts being eaten up VERY quickly). Additionally the STV Motorsports Belt Changing tool is made of 6061 Billet Aluminum and is PROVEN to maintain the integrity of clutch components AND make changing belts QUICK! That's why our tool is a must have for all the Polaris RZR Owners. This belt changing tool has an ergonomic handle for a comfortable grip making it easy for anyone to change belt. The tool's short lenght makes it easy to rotate it 360 degrees while engaged in the secondary clutch. CNC Machined and...

The STV MOTORSPORTS rear/chase light bar was designed for off road enthusiasts Amber/Blue strobe lights in the middle 8 LED blocks: brake lights, tail lights, steady blue, 2 x strobe blue/amber, steady amber, tail lights, brake lights BRAKE LIGHTS: the stop/brake lights are wired independently; 2 blocks of 4 LED's each TAIL LIGHTS: 2 blocks of 4 RED LED tail/running lights; they are also wired independently STEADY BLUE: 1 block of 4 BLUE LED lights STROBE AMBER/BLUE: 2 blocks of 4 LEDs AMBER and BLUE strobe lights with independent wiring and flashing patterns that can be controlled by the on/off switch (included) STEADY AMBER: 1 block of 4 AMBER LED lights Wiring harness with ON/OFF switch (strobe controller) is included Fits: UTV, Polaris RZR, Yamaha, Can-Am, ATV, Trucks, Off-Road Vehicles Used in Off-Road vehicles for racing Lenght: 34 1/4 Inch Power: 32W Working life: 50000 hours and above Material: Aluminum housing Lens: Tough glass Buy it ...

STV Motorsports Racing Harnesses are a must-have for any driver of high performance or racing vehicles. They will offer you the best protection and driver safety as well as comfort. The NEW 5 Point Cam Lock Racing Harness is made from ultra-high quality materials that will firmly hold you in place while racing or off-roading. With the new 2 Inch shoulder straps it offers more comfort and the ability to use these with head/neck restraint systems. This new 2” design for the shoulder straps are better option for the wife or kids with smaller shoulders, where normal 3” wide shoulder harnesses don’t fit correctly and will slide off the shoulders. But with this you still get that extra safety from having the 3” lap belts.

STEREO LASER ROCKER SWITCH 20 Amp 12 Volt ON-OFF Rocker Switch LASER ETCHED WITH TWO L.E.D. LIGHTS Single Pole Single Throw ON-OFF Switch Black hard surface rocker Surface size is 2″ (50mm) x 1″ (25mm) Standard size mounting hole 1.41″ (36mm) x .86″ (22mm). This is the standard size of most switch holes in modern vehicles. Upper light is ON when the switch is pressed UP Lower LED is independent and can be wired to separate dash light circuit. Both LEDs have separate grounds. ...... More info. Please  Click here !

STV Motorsports dual color WHITE/AMBER/STROBE 30″ 180W OFF-ROAD Led Light Bar SPECIFICATIONS: SPOT/FLOOD combo beam White/Amber/Strobe Light With remote controller 30 inch, 180W, 60pcs high intensity 3W bulbs Waterproof and shockproof Heavy Duty Aluminum Housing FITS: Trucks, Jeeps, ATV’s, UTV’s , Boats Used: hunting, fishing Life Span: 50,000 hours Physical Size: 32″ lenght x 3.25″ height

STV Motorsports Harnesses are a must-have for any driver of high performance, off-road or racing vehicles,Our entire line of UTV Accessories will upgrade every one of the elements of your ride:speed,power,and style.Break your limits now by browsing our website .

While off-road racing you could be injured without good quality safety accessories, So here STV Motorsports is offering the 4 Point Racing Harness which is created from ultra-high-quality stuff that will securely support you in place while racing, get more details about price and racing harness here !

One of the FIRST things you should upgrade when you receive your brand new RZR is the ROLL CAGE , aside from a few other things.When cage manufacturers build aftermarket cages they will often use 1.75″ DOM tubing with a thickness of .095″ (the stock cage is only .065″).

The 4 Point Harness is made from ultra-high-quality materials that will firmly hold you in place while racing. 2 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level.   Read more

16W Pods ideal for putting on UTVs, Jeeps, Trucks. Flush-mount version (available) is perfect for putting in bumpers, etc.  read more   

Want to take your vehicle on some rough terrain? Make sure your 4x4 is equipped with necessary items and off road vehicle parts . STV Motorsports designs, builds and sells High-quality off-road vehicle parts, accessories, and tools.

The 4 Point Racing Harness is made from ultra-high-quality materials that will firmly hold you in place while racing. 2 or 3 Inch shoulder straps made with sewn in soft padding will ensure a high comfort level.

Find best deals for light bar switch  here! light bar switch - 20 Amp 12 Volt OFF-ON Rocker Switch which is Laser etched with two L.E.D. lights and single pole single throw OFF-ON Switch with Black hard surface rocker having features like: - Surface size is 2? (50mm) x 1? (25mm) - Standard size mounting hole 1.41? (36mm) x .86? (22mm). This is the standard size of most switch holes in modern vehicle.